TiLOOP® Patch

Implantation

Central pelvic floor defects without evident lateral defect can be stabilised using TiLOOP® Patch. The anterior colporrhaphy is performed in the conventional way from the neck of the bladder to the vaginal stump or to the cervix. This is followed by extensive preparation of the anterior vaginal wall. The purpose of the patch is to prevent new hernial canals from forming in cases of an existing connective tissue weakness.

The cystocele is lowered by placing transverse sutures. The TiLOOP® Patch is then attached with loose fixation using absorbable sutures and subsequent vaginal closure.

The rectocele is treated with posterior colporrhaphy in the conventional manner. The posterior wall of the vagina is prepared from the rectum. The rectocele is lowered by placing transverse sutures. The TiLOOP® Patch is then attached with loose fixation using absorbable sutures and subsequent vaginal closure.

Titanisation

Chemical vapour deposition (CVD) is a process for the metallisation of complex components while at the same time achieving strong bonds. However, as this process involves temperatures in excess of 150°C, it is not an option for many prosthetic materials which would not be shape retentive at such temperatures (e.g. polypropylene).

For that reason, the titanisation of plastic implants takes place at low temperatures using a special plasma-coating process known as PACVD (plasma-activated chemical vapour deposition).

Plasma is the term used for an excited (ionised) gas. In that stage, atoms/molecules are highly energetic. However, plasma is not hot. In everyday life, we are familiar with plasma in fluorescent tubes. The electrically charged gas components emit light as the result of their highly energetic state, but the fluorescent tube remains cold.

In the titanisation process, gaseous titanium is introduced into the coating chamber as a precursor. By adding energy in form of plasma, the precursor is split into individual ionised atoms. These ionised titanium atoms have free electrons at their surfaces.

In addition to the precursor, the plasma also excites the surfaces of the plastic implants with the result that their surfaces also have free electrons. The ionised titanium atoms come into contact with the ionised surface of the implant resulting in the formation of covalent bonds with the free electrons. Covalent bonds are seen as the strongest of chemical bonds; the titanium is thus almost permanently bonded to the plastic.

This process creates a composite material whose surface is coated with an ultra-thin, approx. 30–50 nm (1 nanometre = 1 millionth of a millimetre), highly biocompatible layer of titanium. The coating is so thin that it appears to be transparent and is also highly flexible.

Because the titanium precursor is introduced in gaseous form, it reaches all parts of the plastic implant. As the result, the entire surface, including gaps in between complex shapes, is completely and evenly titanised.