Application The standard object clamp large, orientable is suitable for the pfm Slide 2003/4003 E.
- For larger specimens
- Orientable version with adapter
- Maximum specimen size: 45 x 60 mm
pfm medical ag
Wankelstraße 60
50996 Köln, Germany
The standard object clamp large, orientable has been developed by pfm medical ag and is produced in Germany.
Fitting/removing the standard object clamp large, orientable
To change the standard object clamp, loosen the eccentric lever and remove it from the guide bore. Both adjusting screws have to be turned to the red mark. After that, the entire standard object clamp together with the adapter can be removed upwards. For fitting the standard object clamp, reverse the above procedure. Take care with the correct positioning of the guide bore in the adapter to allow reinsertion of the eccentric lever.
| REF | PU |
|---|---|
| 013009 | 1 |
- Microtomes
- Microtome Accessories
- Adapter Fixed
- Adapter Orientable
- Disposable Blade Holder, Upper Jaw, High Profile
- Disposable Blade Holder, Upper Jaw, Low Profile
- Distance Device Blade Holder
- Finger Guard, Magnetic
- Knife Holder Base
- Knife Holder pfm Slide 2002
- Knife Holder pfm Slide 2003/4003 E
- One Touch Knife Holder
- Protection Tray with Sealing Ring
- Section Waste Tray pfm Rotary 3002/3003
- Section Waste Tray pfm Slide 2002
- Section Waste Tray pfm Slide 2003
- Section Waste Tray pfm Slide 4003 E
- Standard Object Clamp Large, Non-Orientable
- Standard Object Clamp Large, Orientable
- Standard Object Clamp, Non-Orientable
- Standard Object Clamp, Orientable
- Universal Cassette Clamp , Non-Orientable, Slide 2002
- Universal Cassette Clamp Large, Non-Orientable
- Universal Cassette Clamp Large, Orientable
- Universal Cassette Clamp, Non-Orientable
- Universal Cassette Clamp, Orientable
- Rotary Microtomes
- Sliding Microtomes
- Microtome Accessories
