Port Catheter venous
T-Port Low-Profile Contrast
The implantable T-Port Low-Profile Contrast port system made from titanium is used to administer systemic chemotherapy, long-term parenteral nutrition or long-term medication. This port system also permits the high-pressure application of contrast media during repeated tumour staging.
Titanium material of proven quality
Compact size
Suitable for high-pressure applications
Safe identification The radiopaque CT marking on the bottom of the port ensures safe identification as a high-pressure port.
High reliability
- High-pressure-resistant catheter made from biostable, implantation-tested polyurethane
- Radiopaque catheter
- Vessel-friendly atraumatic catheter tip
- Connectable catheter
- Distinctly palpable septum for the clear identification of the puncture site
- Safe retention of the puncture cannula in the port septum
- Transparent click-connector for simple and easy connection
- Safe and reliable fixation of catheter and port chamber
- Pressure-stable to max. 21 bar/300 psi
- Flow rate max. 5 ml/s
- Suitable for injections of contrast medium required for computer tomography
- Highly concentrated bolus with good phase separation
- Easy access to the vascular system for radiology
- Protection of the peripheral veins of the patient
- Time savings for users combined with high examination quality
- Size: 23 mm (Ø base plate) × 10 mm (H))
- Length of catheter: 750 mm
Notes
The required flow rate and pressure stability (for the injection of contrast media for CT examinations) can be ensured by using a 19 G (1.1 mm) Huber needle from the Jetcan™ range or with the EZ Huber™ safety infusion cannula (to avoid needlestick injuries). Both product ranges are available from pfm medical.
Test conditions
High-pressure injector with a set maximum pressure of 21 bar/300 psi; flow rate 5 ml/s; connection tube 1.5 m, 60 s; contrast medium Visipaque® 320 at a temperature of 37 to 38°C; with vascular simulation; Jetcan™ (19 G, 25 mm) Huber needle with extension.
Instructions for use and port care advice must be strictly adhered to.
Data from in-vitro test series are available on request.
Available in two versions: set and basic
Set components
1 port with CT marking, 1 catheter (750 mm long with atraumatic tip), 1 rinsing needle, 1 Jetcan™ straight Huber needle (22 G, 25 mm), 2 click-connectors, 1 vein lifter, accessories for identification of the high-pressure port, 1 introducer kit (peel-away sheath with dilator, guide wire, puncture needle), 1 tunnelling needle
Basic components
1 port with CT marking, 1 catheter (750 mm long with atraumatic tip), 1 rinsing needle, 1 Jetcan™ straight Huber needle (22 G, 25 mm), 2 click-connectors, 1 vein lifter, accessories for identification of the high-pressure port. Separate introducer kit available if required.
| REF | OD | Version | ID | Catheter | Material | PU |
|---|---|---|---|---|---|---|
| 6163562087 | 2.6 mm | Basic | 1.6 mm | 8.0 F | PUR soft | 1 |
| 6163563077 | 2.2 mm | Basic | 1.3 mm | 6.6 F | PUR soft | 1 |
| 6163662087-K | 2.6 mm | Set | 1.6 mm | 8.0 F | PUR soft | 1 |
| 6163663077-K | 2.2 mm | Set | 1.3 mm | 6.6 F | PUR soft | 1 |
