Port Catheter venous
TitaJet™ light II Contrast
The implantable TitaJet™ light II Contrast titanium port system with a port insert made from titanium and plastic casing is used to administer systemic chemotherapy, long-term parenteral nutrition or long-term medication. This port system also permits the high-pressure application of a contrast medium as part of regular tumour staging.
Plastic–titanium combination
Reduced risk of migration The low weight reduces the risk of migration and increases patient comfort.
Easy placement The oval shape of the port makes it easy to insert into the prepared pocket.
Suitable for high-pressure applications
Safe identification The radiopaque CT marking on the bottom of the port ensures safe identification as a high-pressure port.
MRI-compatible and reduced artefact formation
- High-pressure-resistant catheter made from biostable, implantation-tested polyurethane
- Radiopaque catheter
- Vessel-friendly atraumatic catheter tip
- Connectable catheter
- Distinctly palpable septum for the clear identification of the puncture site
- Safe retention of the puncture cannula in the port septum
- Transparent click-connector for simple and easy connection
- Safe and reliable fixation of catheter and port chamber
- Pressure-stable to max. 21 bar/300 psi
- Flow rate max. 5 ml/s
- Suitable for injections of contrast medium required for computer tomography
- Highly concentrated bolus with good phase separation
- Easy access to the vascular system for radiology
- Protection of the peripheral veins of the patient
- Time savings for users combined with high examination quality
- Size: 32.1 x 23.6 x 13.2 mm (L x W x H)
Notes
The required flow rate and pressure stability (for the injection of contrast media for CT examinations) can be ensured by using a 19 G (1.1 mm) Huber needle from the Jetcan™ range or with the EZ Huber™ safety infusion cannula (to avoid needlestick injuries). Both product ranges are available from pfm medical.
Test conditions
High-pressure injector with a set maximum pressure of 21 bar/300 psi; flow rate 5 ml/s; connection tube 1.5 m, 60 s; contrast medium Visipaque® 320 at a temperature of 37 to 38°C; with vascular simulation; Jetcan™ (19 G, 25 mm) Huber needle with extension.
Instructions for use and port care advice must be strictly adhered to.
Data from in-vitro test series are available on request.
Available in two versions: set and basic
Set components
1 port with CT marking, 1 catheter (750 mm long with atraumatic tip), 1 rinsing needle, 1 Jetcan™ straight Huber needle (22 G, 25 mm), 2 click-connectors, 1 vein lifter, accessories for identification of the high-pressure port, 1 introducer kit (peel-away sheath with dilator, guide wire, puncture needle), 1 tunnelling needle
Basic components
1 port with CT marking, 1 catheter (750 mm long with atraumatic tip), 1 rinsing needle, 1 Jetcan™ straight Huber needle (22 G, 25 mm), 2 click-connectors, 1 vein lifter, accessories for identification of the high-pressure port. Separate introducer kit available if required.
| REF | OD | Version | ID | Catheter | Material | PU |
|---|---|---|---|---|---|---|
| 6163582087 | 2.6 mm | Basic | 1.6 mm | 8.0 F | PUR soft | 1 |
| 6163583077 | 2.2 mm | Basic | 1.3 mm | 6.6 F | PUR soft | 1 |
| 6163682087-K | 2.6 mm | Set | 1.6 mm | 8,0 F | PUR soft | 1 |
| 6163683077-K | 2.2 mm | Set | 1.3 mm | 6.6 F | PUR soft | 1 |
