Jet Port® Plus Low Profile Peripheral


The implantable port system Jet Port® Plus Low Profile Peripheral made of high-quality plastic is used to administer systemic chemotherapy, long-term parenteral nutrition or long-term medication. The slim design allows for the use in smaller patients or as peripheral port, e.g. for placement in the arm.


Benefits

High-quality plastic (polyoxymethylene)  The implantation-tested plastic material provides a reduced weight.

Reduced risk of migration  The low weight reduces the risk of migration and increases patient comfort.

Slim design  The narrow shape of the port allows for use in smaller patients or as peripheral port e.g. for placement in the arm.

Discreet placement  Small dimension for discreet placement.

MRT-conditional  Minimal artefact formation (up to 3.0 T)

Connection mechanism  The transparent click-connector for simple and easy connection as well as safe and reliable fixation of catheter and port chamber.

Details

  • Catheter made of biostable, implantation-tested polyurethane (PU) or silicone
  • Radiopaque catheter
  • Vessel-friendly atraumatic catheter tip
  • Connectable catheter
  • Highly compressed silicone membrane for secure closing of septum and secure holding of puncturing needle
  • Well-palpable septum for safe identification of the puncture site
  • Latex-, DEHP- and PVC-free

Tech. Data

  • Length of catheter: 750 mm
  • Dimension: 24.0 x 20.5 x 10.3 mm (L x W x H)
  • Weight: 3.5 g
  • Residual volume chamber: 0.3 ml
  • Septum diameter: 8.0 mm

Catheter PU soft 1.0 x 1.6 mm

  • Flow rate*: 14 ml/min.
  • Residual volume: 0,10 ml/10 cm Length of catheter

Catheter PU soft 1.3 x 2.2 mm

  • Flow rate*: 25 ml/min.
  • Residual volume: 0.18 ml/10 cm Length of catheter

Catheter Silicone 1.0 x 2.2 mm

  • Flow rate*: 14 ml/min.
  • Residual volume: 0.10 ml/10 cm Length of catheter

*19-G-needle 0.9%-NaCl solution, Length of catheter 40 cm, gravitation altitude difference 100 cm

Configurations

Set components

  • 1 Port
  • 1 Catheter with atraumatic tip
  • 2 Click-connectors
  • 1 Rinsing needle
  • 1 JetCan™ straight Huber needle (22 G, 25 mm)
  • 1 JetCan™ curved Huber needle, with extension (22 G, 25 mm)
  • 1 Vein lifter
  • 1 Syringe 10 ml
  • 1 Introducer kit (peel-away sheath with dilator, guide wire 700 mm with J-tip, puncture needle)
  • 1 Patient ID-card

Basic components

  • 1 Port
  • 1 Catheter with atraumatic tip
  • 2 Click-connectors
  • 1 Rinsing needle
  • 1 JetCan™ straight Huber needle (22 G, 25 mm)
  • 1 Vein lifter
  • 1 Patient ID-card

Separate introducer kit available on request.

Manufacturer

pfm medical cpp SA

9, Allée du Quartz

CH 2300 La Chaux-de-Fonds, Switzerland

Ordering Information

Jet Port® Plus Low Profile Peripheral
REFODVersionIDCatheterMaterialPU
61.635.03.0702.2 mmBasic1.3 mm6.6 FPU soft1
61.636.03.0702.2 mmSet1.3 mm6.6 FPU soft1
61.646.07.0702.2 mmSet1.0 mm6.6 FSilicone1
61.647.07.0702.2 mmBasic1.0 mm6.6 FSilicone1