Standard Object Clamp, Orientable
A range of accessories is available to adapt pfm medical ag microtomes to individual customer requirements.
Benefits
Application The standard object clamp orientable is suitable for the pfm sliding and rotary microtomes.
Details
- Orientable version with adapter
- Maximum specimen size: 40 x 45 mm
Knowledge
The standard object clamp orientable has been developed by pfm medical ag and is produced in Germany.
Mounting
Fitting/removing the standard object clamp, orientable
To change the standard object clamp, loosen the eccentric lever and remove it from the guide bore. Both adjusting screws have to be turned to the red marks. After that, the entire standard object clamp together with the adapter can be removed upwards. For fitting the object clamp, reverse the above procedure. Take care with the correct positioning of the guide bore in the adapter to allow reinsertion of the eccentric lever.
Manufacturer
pfm medical ag
Wankelstraße 60
50996 Köln, Germany
Ordering Information
| REF | VPE |
|---|---|
| 010044 | 1 |