Jet Port® Plus


The implantable arterial port system Jet Port® Plus is used for arterial application, in particular for regional chemotherapy of liver.


Benefits

High-quality plastic (polyoxymethylene)

Catheter material  Biostable, implantation-tested polyurethane (PU)

Catheter tip  Vessel-friendly and atraumatic catheter tip with thickened section for securing it in artery

Details

  • Radiopaque catheter
  • Connectable catheter
  • Highly compressed silicone membrane for secure closing of septum and secure holding of puncturing needle
  • Well-palpable septum for safe identification of the puncture site
  • Latex-, DEHP- and PVC-free

Tech. Data

  • Length of catheter: 900 mm
  • Dimension: 28.0 mm (Ø base plate) × 12.3 mm (height))
  • Residual volume: 0.37 ml
  • Weight: 5.9 g
  • Septum diameter: 10.0 mm
  • Puncture frequency (non-coring 19-G needle): 1.000

Catheter PUR soft 1.0 x 1.6 mm

  • Flow rate*: 14 ml/min.
  • Residual volume: 0,10 ml/10 cm Length of catheter

*19-G-needle 0.9%-NaCl solution, Length of catheter 40 cm, gravitation altitude difference 100 cm

Configurations

Jet Port® Plus Arterial

  • 1 Port
  • 1 Catheter with atraumatic tip and thickened section
  • 1 Rinsing needle
  • 1 JetCan™ straight Huber needle (22 G, 25 mm)
  • 1 Click-connector
  • 1 Vein lifter
  • 1 Patient ID-card

Manufacturer

pfm medical cpp SA

9, Allée du Quartz

CH 2300 La Chaux-de-Fonds, Switzerland

Ordering Information

Jet Port® Plus
REFODVersionIDCatheterMaterialVPE
61.635.36.0901.6 mmArterial1.0 mm4.8 FPUR soft1